Aspirators / String Up / Doffing Guns & Static Suction Units
Twisting & Non Twisting Suction applications for POY, LOY,
FDY, BCF, Tape Yarns, Staple Fiber, fibrillated tapes, monofilaments,
texturisers, draw winders, crimpers, etc.
We sell Aspirator Guns, view the technical information below, or Contact Us if you have any questions.
Please use the menu on the right to navigate the rest of the website. ➪➪
Below are nearest equivalent Aspirator Gun models of other makes for general reference only.
High Speed Range including Modified Type Aspirator (Yarn Suction) Guns with ¾” Valve
Inlet-20 mm I/D Hose, Outlet-30 mm I/D Hose. *Optional ‘ Metallic Tip’ in lieu of standard plastic guide holder with ceramic insert at extra cost. For 1800 U/ 1500 M types it is standard supply. Most of the cases you will find our standard high speed series models will replace Enka’s (Now Oerlicon) Luftan LC series types being used, where the applications are low speed or speeds generally not exceeding 4000 mtrs/min. Models with suffix-M, are generally equivalent to Enka’s LC series & are more suitable for higher yarn speeds exceeding 4000 mtrs / min up to 6000 mtrs/ min requiring higher operating pressures.
Ultra High Speed Range including Modified Type Aspirator Guns With 1” Valve
Inlet-direct male thread hose fitting in 1” BSP Valve using female reducer adopter. Outlet – 32 mm (1.25”) I/D Hose. *Optional ‘Metallic Tip’ in lieu of standard plastic guide holder with ceramic insert at extra cost, except for types 1500/1800 for which it is standard supply.
Aspirators for POY, LOY Applications with ¾” valve, Inlet-20 mm I/D Hose, Outlet-30 mm I/D Hose. Yarn speeds generally not exceeding 4,000 mtrs/min.
| Model |
| AEC-500, Denier range 2,000 Dtex |
| AEC-750, Denier range 4,000 Dtex |
| AEC-1000, Denier range 10,000 Dtex |
| AEC-1250, Denier range 12,000 Dtex |
Aspirators for high speed spinning Applications with ¾” valve, Inlet-20 mm I/D Hose, Outlet-30 mm I/D Hose. Yarn speeds generally not exceeding 6,000 mtrs/min.
| Model |
| AEC-500 M, Denier range 2,000 Dtex |
| AEC-750 M, Denier range 4,000 Dtex |
| AEC-1000 M, Denier range 10,000 Dtex |
| AEC-1250 M, Denier range 12,000 Dtex |
Aspirators for bery high speed spinning FDY, BCF Applications with 1” valve, Inlet-25 mm ID Hose, Outlet-32 mm ID Hose. Yarn speeds generally up to 8,000 mtrs/min.
| Model |
| AEC-500 U, Denier range 2,000 Dtex |
| AEC-750 U, Denier range 4,000 Dtex |
| AEC-1000 U, Denier range 10,000 Dtex |
| AEC-1250 U, Denier range 12,000 Dtex |
| AEC-1800 U, Denier range 30,000 Dtex |
Aspirators for non twisting suction applications like tape yarns, staple fibre, fibrillated tape, etc
with ¾” valve, Inlet-20 mm I/D Hose, Outlet-30 mm I/D Hose. Yarn speeds up to 2,000 mtrs/min.
| Model |
| AEC- LS 250, Denier range 2,000 Dtex with ½’ valve, 12 mm Inlet hose & 18 mm ID exhaust hose |
| AEC- LS 1000, Denier range 10,000 Dtex |
| AEC- LS 1250, Denier range 12,000 Dtex |
| AEC- LS 1500, Denier range 20,000 Dtex |
| AEC- 1200 M, Denier range 20,000 Dtex |
Aspirators for low speed, texturising, draw winder, crimping, with 3/8’ valve, Inlet-12 mm I/D Hose, Outlet-18 mm I/D Hose. Yarn speeds up to 1,500 mtrs/min.
| Model |
| AEC- 330 D |
| AEC – 300 |
| AEC – 400 |
| AEC – 300 D (choice of suction tube profiles available to suit variety texturiser models) |
Static Aspirators/ stationary suction units for mounting below duct or bobbin stripping.
| Model |
| AEC-100 |
| AEC-110 |
| AEC-120 |
| AEC-140 |
Modified Configuration Range ‘AEC – [ 500 / 750 / 1000 / 1250 / 1500 / 1800 ] U-M’ is with special larger 38.1mm O/D waste pipe using off-set adopter for valve for special applications.
View Aspirator Guns »
CONTACT FRANKL & THOMAS
Please note that we do not list all of our products online. If you don’t see a product you’re looking for, please Contact Us.
